hitmanmcchitmanmcc
FeedConsolesCRTsSymptomsTechniquesLab

© 2026 Hitman's Museumv1.15.5

About·Privacy·Terms
Consoles/Nintendo/GameCube

Nintendo — GameCube

Nintendo GameCube (Silver): Optical Drive and Mainboard Recap

November 19, 20233 threads~1 min read
Disc read error
RecapOptical-drive service

This silver Nintendo GameCube (DOL-001) was recapped twice. First its optical drive PCB, to cure a disc read fault (on these consoles it is usually the caps, not the laser). Later, a full mainboard recap, which kicked off the campaign to recap the mainboards across the whole GameCube fleet. Razor-sharp Tetris blocks to celebrate.

hitmanmcc
hitmanmcc

November 19, 2023· Thread 1· 3 tweets

View on X ↗Without login ↗

(1/5) Gamecube maintenance day. Replacing the caps on the optical drive PCBs. Started 4/5 drives dead, now 5/5 work. Huge success! Thanks @leonkiriliuk, I think it was in one of his posts that I read that the laser isn't usually the issue, it's the caps. #RETROGAMING #restoration

2 / 3

(2/5) These 3 just needed the capacitors replaced and they immediately started working fine. #RETROGAMING #Nintendo #CRT

3 / 3

(5/5) One big happy family. All of them now have working drives! #RETROGAMING #Nintendo #gamecube #restoration #repair

hitmanmcc
hitmanmcc

March 26, 2025· Thread 2

View on X ↗View on Bluesky ↗

Today, I give you... razor sharp tetrominos! This begins the journey of recapping the mainboards on all my GameCube consoles. #retrogamming #Nintendo #GameCube

hitmanmcc
hitmanmcc

July 18, 2025· Thread 3

View on X ↗View on Bluesky ↗

Making sure the downstairs matches the upstairs. #Nintendo #GameCube #GameBoy #GameBoyAdvance

Related repairs

Two GameCube optical drive PCBs being recapped, with desoldered electrolytic capacitors, tweezers, and a resistor laid out on absorbent mat.

Nintendo — GameCube

Nintendo GameCube Optical Drive Recap: 2 Spares

A hand holding a recapped GameCube optical drive, working again after the recap, the Sony BVM-D9H5J monitor showing the GameCube menu's Game Play option.

Nintendo — GameCube

Nintendo GameCube Pearl White: DOL-001 in DOL-101 Shell

Open GameCube optical drive on a wooden floor showing the exposed blue disc and orange housing, with a hand pressing the lid switches that tell the console the lid is closed, testing the drive after recapping its PCB. A Sony BVM-D9H5J monitor behind shows The Legend of Zelda: The Wind Waker.

Nintendo — GameCube

Nintendo GameCube Spice Orange: PicoBoot to FlippyDrive

PC Engine CD-ROM2 internal mechanism with the laser assembly, motor, PCB and wiring on the white plastic chassis, showing the shaft where the old crumbling gear sat and where the new 3D-printed replacement gear was about to be fitted.

NEC — PC Engine CD-ROM2

NEC PC Engine CD-ROM² Restoration: Gears, Laser & Recap

Super Famicom motherboard mid-repair: recapped with new capacitors, voltage regulator replaced, some SMD components remaining; soldering iron and loose components visible on workbench.

Nintendo — Super Famicom

Nintendo Super Famicom Recap & Voltage Regulator Swap

Super Famicom Jr. motherboard on workbench with purple mod board installed, soldering iron, wire strippers, and solder spool visible during repair work.

Nintendo — Super Famicom Jr.

Nintendo Super Famicom Jr. (SHVC-101) Recap & Upgrades