hitmanmcchitmanmcc
InicioConsolasCRTsSíntomasTécnicasLab

© 2026 Hitman's Museumv1.18.1

Acerca·Privacidad·Términos
Consolas/Nintendo/Game Boy

Nintendo — Game Boy

Nintendo Game Boy DMG Play It Loud Black Restoration

6 de abril de 20241 hilo~1 min de lectura
Recap

A black Play It Loud Nintendo Game Boy DMG-01 sourced from Japan at a friend's request: recapped and cleaned up, with the shell sorted before it was delivered.

Piezas y Herramientas (1)

Game Boy DMG-01 cap kit

Game Boy DMG-01 cap kit by Console5, the replacement capacitor kit used to recap the console.

hitmanmcc
hitmanmcc

6 de abril de 2024· Hilo 1

Ver en X ↗

Restoring a black Play It Loud! Game Boy for a friend. Ultrasonic bath, new capacitors, just needs a final cleaning. Also refurbished a couple of Tetris cartridges. #RETROGAMING #Nintendo #GameBoy #Tetris #restoration

Reparaciones relacionadas

Nintendo DMG Game Boy PCBs during recap repair: green mainboard with new capacitors installed, donor board right, service card visible below.

Nintendo — Game Boy

Nintendo Game Boy DMG-01 Recap & Clean (2nd Unit)

Original Nintendo Game Boy DMG, a companion piece retrobrited alongside the Mark III, disassembled in a clear container ready for the vapour-method retrobrite (a pre-process shot): the GAME BOY front shell with d-pad and buttons, the back shell with battery compartment, and small parts in a jar lid.

Nintendo — Game Boy

Nintendo Game Boy DMG-01 Retrobriting (First Try)

Nintendo Game Boy Light (MGB-101): Battery Leak & Recap

Nintendo — Game Boy Light

Nintendo Game Boy Light (MGB-101): Battery Leak & Recap

Super Famicom motherboard mid-repair: recapped with new capacitors, voltage regulator replaced, some SMD components remaining; soldering iron and loose components visible on workbench.

Nintendo — Super Famicom

Nintendo Super Famicom Recap & Voltage Regulator Swap

Super Famicom Jr. motherboard on workbench with purple mod board installed, soldering iron, wire strippers, and solder spool visible during repair work.

Nintendo — Super Famicom Jr.

Nintendo Super Famicom Jr. (SHVC-101) Recap & Upgrades

AV Famicom motherboard on a paper-towel work surface, with the old desoldered electrolytic capacitors, a removed 7805 voltage regulator, a spool of Kester Sn63Pb37 solder, used cotton swabs, and a black brass-sponge tip cleaner laid out around it.

Nintendo — AV Famicom

Nintendo AV Famicom (HVC-101) Recap, 7805 & Clean