hitmanmcchitmanmcc
InicioConsolasCRTsSíntomasTécnicasLab

© 2026 Hitman's Museumv1.18.1

Acerca·Privacidad·Términos
Consolas/Nintendo/Super Famicom Jr.

Nintendo — Super Famicom Jr.

Nintendo Super Famicom Jr. (SHVC-101) Recap & Upgrades

12 de septiembre de 20253 hilos~1 min de lectura
RecapVoltage-regulator swapAV output mod

Full refresh on this well-kept Nintendo Super Famicom Jr. (SHVC-101): recap, 7805 voltage regulator swap, shell clean, and a Borti4938 RGB bypass board install with brightness and ghosting fix component swaps.

Piezas y Herramientas (1)

1-Chip / SNES Jr. RGB bypass + csync mod

PCPTech RGB bypass / video enhance / csync mod for the SNES Mini / Super Famicom Jr. / 1-chip SNES.

hitmanmcc
hitmanmcc

12 de septiembre de 2025· Hilo 1· 4 tweets

Ver en X ↗Ver en Bluesky ↗

1/4 Opened up the Super Famicom JR. to recap and found some dust bunnies. #SNES #Famicom

2 / 4

2/4 Here it is, recapped, new regulator and a cleaned shell. #restoration

3 / 4

3/4 Broke out my Tink4K and installed the latest firmware. Popped on my copy of Super Metroid and... the tink does clean up composite quite a lot. #Nintendo #Metroid #RETROGAMING

4 / 4

4/4 For good measure also figured I'd try it on a PVM as well. #CRT #Sony #PVM

hitmanmcc
hitmanmcc

23 de septiembre de 2025· Hilo 2

Ver en X ↗Ver en Bluesky ↗

Got something in the mail today. This will be a nice upgrade to the Super Famicom Jr., when I find the time to do it. #SuperFamicom #RetroGaming

hitmanmcc
hitmanmcc

22 de octubre de 2025· Hilo 3· 2 tweets

Ver en X ↗Ver en Bluesky ↗

Here's a fun little mod for the Super Famicom Jr., designed by @borti4938 and purchased from @PCP_Tech. Also switched out the components for the brightness and ghosting fixes. #RETROGAMING #SNES

2 / 2

Hey look at that, it works. This is enhanced S-video on the Tink4K Pro because I couldn't find my RGB cable. #Castlevania

Reparaciones relacionadas

Super Famicom motherboard mid-repair: recapped with new capacitors, voltage regulator replaced, some SMD components remaining; soldering iron and loose components visible on workbench.

Nintendo — Super Famicom

Nintendo Super Famicom Recap & Voltage Regulator Swap

AV Famicom motherboard on a paper-towel work surface, with the old desoldered electrolytic capacitors, a removed 7805 voltage regulator, a spool of Kester Sn63Pb37 solder, used cotton swabs, and a black brass-sponge tip cleaner laid out around it.

Nintendo — AV Famicom

Nintendo AV Famicom (HVC-101) Recap, 7805 & Clean

A hand holding the small black composite mod board beside the green Nintendo Famicom motherboard (CPU-GPM-02) on the workbench, with a multimeter and bagged replacement parts sitting nearby.

Nintendo — Famicom

Nintendo Famicom Fuse Fix & Composite Mod

Green NESRGB daughterboard installed on the Sharp Twin Famicom motherboard, the original CPU/PPU DIP chip re-socketed on top, with a white ribbon cable attached to the NESRGB board but not yet connected to anything else.

Nintendo — Sharp Twin Famicom

Sharp Twin Famicom NESRGB Wireless Mod & TwinDiamond

Nintendo Game Boy Light (MGB-101): Battery Leak & Recap

Nintendo — Game Boy Light

Nintendo Game Boy Light (MGB-101): Battery Leak & Recap

Two Nintendo Game Boy Player (DOL-017) units seen from their top side (the side that docks to the GameCube) on paper towel, a silver one and an indigo one, each with a sealed Console5 GameCube GB Player cap kit bag (NIN-GC-GBPLAYER-SMD-CK) resting on it, and an FNIRSI soldering iron in its case to the right.

Nintendo — Game Boy Player

Nintendo Game Boy Player (DOL-017) Recap: Leaking Caps