hitmanmcchitmanmcc
フィードゲーム機CRT症状テクニックLab

© 2026 Hitman's Museumv1.18.1

プロフィール·プライバシー·利用規約
ゲーム機/Nintendo/GameCube

Nintendo — GameCube

Nintendo GameCube Recap & XenoGC Mod for Two Friends

2022年6月21日2スレッド約1分で読めます
Disc read error
RecapOptical-drive serviceBattery replacementModchip / ODE

Two Nintendo GameCubes (black and spice orange) restored for friends: Console 5 mainboard cap kit, optical drive and PSU recap, XenoGC chip and new coin cell battery holders. Wind Waker was played immediately.

部品・工具 (1)

XenoGC mod chip

XenoGC mod chip for the GameCube, enabling homebrew and backup loading. Documentation on the gc-forever wiki.

hitmanmcc
hitmanmcc

2022年6月21日· スレッド1

Xで見る ↗

Restored some Gamecubes last week and fitted them with some Xeno GCs from @ConsoleMods. There are now some happy friends replaying Wind Waker. #RETROGAMING #retrogamer #Nintendo

hitmanmcc
hitmanmcc

2022年7月1日· スレッド2

Xで見る ↗

Another orange spice Gamecube restored for a friend. This one underwent a full recap and a Xeno installation. Chip sourced from @ConsoleMods. #RETROGAMING #Nintendo #GameCube #consolemodding

関連する修理

Open GameCube optical drive on a wooden floor showing the exposed blue disc and orange housing, with a hand pressing the lid switches that tell the console the lid is closed, testing the drive after recapping its PCB. A Sony BVM-D9H5J monitor behind shows The Legend of Zelda: The Wind Waker.

Nintendo — GameCube

Nintendo GameCube Spice Orange: PicoBoot to FlippyDrive

A whole black GameCube connected and powered for testing during the optical-drive recap, its amber power LED lit and its parts out of the shell: the green optical drive with the SD Media Launcher boot disc on its spindle, the controller-port PCB hanging by its flex cable, the cooling fan hanging by the wires of its power-input connector, and the PicoBoot in its 3D-printed holder suspended by its soldered wires, with several screwdrivers alongside on a wood surface.

Nintendo — GameCube

Nintendo GameCube DOL-101 PAL: PicoBoot + WiiKey

Two GameCube optical drive PCBs being recapped, with desoldered electrolytic capacitors, tweezers, and a resistor laid out on absorbent mat.

Nintendo — GameCube

Nintendo GameCube Optical Drive Recap: 2 Spares

Dreamcast VA0 motherboard with removed capacitors displayed on left, showing refurbishment work in progress on circuit board.

Sega — Dreamcast

Sega Dreamcast VA0 Recap, GDEMU & Mods (For a Friend)

Disassembled Panasonic Q optical drive rails laid out for comparison; one 3D printed replacement rail next to original shattered rail pieces.

Nintendo — Panasonic Q (SL-GC10)

Panasonic Q (SL-GC10) GameCube: Drive Rails & FlippyDrive

Macro of the Panasonic FZ-1 mainboard's power-supply section, the area worst hit by capacitor leakage: an L4960 regulator, the silver inductor L31 (marked 101), surrounding SMD diodes and resistors, a red status LED and the Panasonic "MDFUP064" silkscreen, with the through-holes darkened and corroded from electrolyte damage.

3DO Company — Panasonic FZ-1

Panasonic FZ-1 3DO: Recap & ODE (2nd, Laser Donor)