hitmanmcchitmanmcc
フィードゲーム機CRT症状テクニックLab

© 2026 Hitman's Museumv1.18.1

プロフィール·プライバシー·利用規約
ゲーム機/Sega/Dreamcast

Sega — Dreamcast

Sega Dreamcast VA0 Recap, GDEMU & Mods (For a Friend)

2025年9月29日7スレッド約2分で読めます
Rust/corrosion
RecapOptical-drive serviceBattery replacementModchip / ODE

Friend asked me to pick up a Sega Dreamcast VA0 from Japan and make it new again. Full recap, fan and optical drive lubrication, GDEMU install with the required VA0 resistor array mod (5V to 3.3V for GDEMU) and a dummy load resistor for the 12V PSU rail. Also fitted a resettable fuse and a fresh ML2032 clock battery.

部品・工具 (4)

240p Test Suite

Artemio Urbina's 240p Test Suite, the homebrew console test suite used to generate the on-screen test patterns shown.

Resistor arrays (VA0 GDEMU mod)

Bourns CAY16-1000F4LF 100 ohm resistor arrays fitted to the VA0 motherboard to bring the GD-ROM connector voltage down from the VA0's 5V to the 3.3V needed by the GDEMU that plugs into it.

GDEMU (original)

GDEMU by Deunan, the original SD-card optical-drive emulator installed in this Dreamcast.

Molykote DX paste

Molykote DX paste, used to lubricate the optical drive mechanism.

hitmanmcc
hitmanmcc

2025年9月29日· スレッド1· 2件のツイート

Xで見る ↗Blueskyで見る ↗

Refurbishing that VA0 Dreamcast. New capacitors on the motherboard, GD-ROM PCB and controller PCB, also replacing the fuse with a resetable one. Cleaning and lubricating the optical drive mechanism. #Dreamcast

2 / 2

Lubricating fan, replacing battery and testing. Testing and sadly the drive still doesn't work but it's not a major issue as it's meant to be replaced by a GDEMU anyway. #RetroGaming

hitmanmcc
hitmanmcc

2025年9月30日· スレッド2· 2件のツイート

Xで見る ↗Blueskyで見る ↗

Modded the Japanese VA0 Dreamcast for GDEmu compatibility and added the janky resistor dummy load to the GDEmu while my friend decides on what to do about the power supply situation (100V PSU on European grid). #Dreamcast #Sega

2 / 2

It's working. Now let's do a burn-in test with Sonic Adventure. #Sega #RETROGAMING #Dreamcast #SONIC #SonicTheHedgehog

hitmanmcc
hitmanmcc

2025年10月1日· スレッド3· 2件のツイート

Xで見る ↗Blueskyで見る ↗

Cleaning the Dreamcast controllers to remove all the dust and grime accumulated throughout the years.

2 / 2

There we go, all better! Squeaky clean. 🫧 #Dreamcast #Sega #RetroGaming

hitmanmcc
hitmanmcc

2025年10月5日· スレッド4· 3件のツイート

Xで見る ↗Blueskyで見る ↗

Taking care of a slightly yellowed and rusted Dreamcast arcade stick. #Sega #dreamcast #RETROGAMING

2 / 3

Disassembled everything. Dipped plates, stick and screws into evaporust.

3 / 3

Washed the shell and ran a pencil eraser through it to remove stuff that wasn't coming out. Lubricated the stick and cleaned all the buttons. Put it back together and it's looking much better. Surprisingly, the rubber even removed some of the yellowing.

hitmanmcc
hitmanmcc

2025年10月7日· スレッド5

Xで見る ↗Blueskyで見る ↗

And with the PSU now recapped we have reached the end of this Dreamcast's journey at my hands. It's ready for its new owner. Ran the 240p test suite to test input on all controllers and then played a couple of rounds of Street Fighter Alpha 3. #Dreamcast #Sega #StreetFighter

hitmanmcc
hitmanmcc

2025年10月15日· スレッド6

Xで見る ↗Blueskyで見る ↗

The final details before the sendoff. Wipe with isopropyl and then application of some 303 protectant. #RETROGAMING #Sega #Dreamcast #MasterSystem

hitmanmcc
hitmanmcc

2025年10月28日· スレッド7

Xで見る ↗Blueskyで見る ↗

And there we go, righting the final wrong. I don't like using radial caps in SMD applications but I couldn't get stock of bi-polar ones at the time. Now I have them, so I fixed that real quick. #RETROGAMING #Sega #Dreamcast

関連する修理

Three translucent bins wrapped in blue-glowing UV LED strips, set up for vapour-method retrobriting: they hold a Famicom shell and this Dreamcast's shell halves along with hydrogen peroxide, a red-capped peroxide bottle resting on top.

Sega — Dreamcast

Sega Dreamcast VA0 NTSC-J: GDEMU, Recap & Dummy Load Mod

Noctua replacement fan installed in Dreamcast VA1 alongside original black fan, showing copper heatsink and internal cooling modification.

Sega — Dreamcast

Sega Dreamcast VA1 PAL Noctua Fan Mod (3D-Printed Mounts)

Nintendo GameCube motherboard with Xeno chip installed, showing soldered connections and internal circuitry during refurbishment.

Nintendo — GameCube

Nintendo GameCube Recap & XenoGC Mod for Two Friends

Game Gear mainboard with ceramic capacitors replaced by electrolytic capacitors during recap repair, showing exposed PCB and component areas.

Sega — Game Gear

Sega Game Gear: No Audio, Ceramic Recap & the Redo

Another angle of the same battery-leakage corrosion on the Sharp X68000 main board before cleaning, some components clearly covered in green corrosion.

Sharp — X68000

Sharp X68000: Recap, FDD & Oscillator (No Picture Yet)

Close-up of the PS1 PSU board with the big main filter cap blown and vented, its foil wrap split open. The filter cap was the only damaged component; the transformer beside it is fine and the orange PCB is undamaged. The CD drive optical pickup sits above the board.

Sony — PlayStation

Sony PS1 PU-7: Magic Smoke, xStation & Switch Fix