hitmanmcchitmanmcc
フィードゲーム機CRT症状テクニックLab

© 2026 Hitman's Museumv1.18.1

プロフィール·プライバシー·利用規約
ゲーム機/Nintendo/Panasonic Q (SL-GC10)

Nintendo — Panasonic Q (SL-GC10)

Panasonic Q (SL-GC10) GameCube: Drive Rails & FlippyDrive

2022年6月25日7スレッド約2分で読めます進行中
Broken drive rail/gear
Modchip / ODEFlex / ribbon repair3D-printed part

The optical drive rails on this Panasonic Q (SL-GC10) GameCube/DVD hybrid were in pieces, so 3D-printed replacements were the first order of business. A FlippyDrive followed. Just be aware the flex cable orientation is the opposite of a regular GameCube.

部品・工具 (1)

FlippyDrive optical drive emulator

FlippyDrive by Team Off Broadway, an SD-card-based optical drive emulator for the Nintendo GameCube, also works in the Panasonic Q (SL-GC10), with the flex cable orientation reversed.

hitmanmcc
hitmanmcc

2022年6月25日· スレッド1

Xで見る ↗

Panasonic Q partial drive restoration. Left rail shattered, drive belt deformed. Glued rail for now, replaced belt, turns out it works fine and reads games. Tray actually moves smoothly but I will still revisit this and replace with 3D printed rails. #RETROGAMING #Nintendo

hitmanmcc
hitmanmcc

2022年7月16日· スレッド2

Xで見る ↗

Properly restored my Panasonic Q's drive by substituting them with these drive rails on @thingiverse As you can be seen in the pics one of the rails was pretty much shattered to bits. Thanks @nunofgs for the prints. #RETROGAMING #Nintendo #consolemodding

hitmanmcc
hitmanmcc

2022年8月6日· スレッド3

Xで見る ↗

Some valuable knowledge here, for those wishing to restore a Panasonic Q's optical drive using 3D printed parts. #RETROGAMING #Nintendo #consolemodding

hitmanmcc
hitmanmcc

2025年7月4日· スレッド4

Xで見る ↗Blueskyで見る ↗

Finally, after a very long wait, my flippydrive units have arrived! One for my spice orange GameCube and one for my Panasonic Q. #RETROGAMING #Nintendo #GameCube #flippydrive

hitmanmcc
hitmanmcc

2025年9月10日· スレッド5· 2件のツイート

Xで見る ↗Blueskyで見る ↗

1/2 While testing #FlipperMCE I decided I would install the #FlippyDrive on my Panasonic Q too, to test more games. In the process I discovered there's no documentation for the Q and you could assume the flex should be placed the same way as in a normal cube but that's incorrect.

2 / 2

2/2 The orientation is flipped around, which I guess ends up making sense since that way you can fit the screw back on for that connector daughter board for the drive. Here are some pics of the menu and me playing some Double Dash. #Nintendo #GameCube #RETROGAMING #MarioKart

hitmanmcc
hitmanmcc

2025年9月11日· スレッド6

Xで見る ↗Blueskyで見る ↗

While this works, I was told that the actual intended placement is beneath the shielding. So, this is what you should end up with. #FlippyDrive #Nintendo #GameCube #RETROGAMING

hitmanmcc
hitmanmcc

2025年9月11日· スレッド7

Xで見る ↗Blueskyで見る ↗

While I was in there, redoing the Flippydrive installation and trying to take pictures that night be used to document the installation procedure. I figured I might as well recap the motherboard, to save me some work in the future, when I decide to recap the rest of the unit.

関連する修理

Two green circuit boards with ribbon connectors and a black mounting jig displayed on dotted fabric, showing Virtual Boy 4.0 LED array PCB assembly components.

Nintendo — Virtual Boy

Nintendo Virtual Boy: Virtual Ribbon 4.0 Display Fix

Nintendo Handheld Screen Repairs: 2DS, New 3DS XL & New 2DS XL

Nintendo — New 3DS XL

Nintendo Handheld Screen Repairs: 2DS, New 3DS XL & New 2DS XL

Macro of the Panasonic FZ-1 mainboard's power-supply section, the area worst hit by capacitor leakage: an L4960 regulator, the silver inductor L31 (marked 101), surrounding SMD diodes and resistors, a red status LED and the Panasonic "MDFUP064" silkscreen, with the through-holes darkened and corroded from electrolyte damage.

3DO Company — Panasonic FZ-1

Panasonic FZ-1 3DO: Recap & ODE (2nd, Laser Donor)

Panasonic FZ-1 motherboard with multimeter probes, solder wick, and desoldering tools during PSU trace repair and recapping restoration work.

3DO Company — Panasonic FZ-1

Panasonic FZ-1 3DO: PSU, Laser Swap & ODE (1st)

A whole black GameCube connected and powered for testing during the optical-drive recap, its amber power LED lit and its parts out of the shell: the green optical drive with the SD Media Launcher boot disc on its spindle, the controller-port PCB hanging by its flex cable, the cooling fan hanging by the wires of its power-input connector, and the PicoBoot in its 3D-printed holder suspended by its soldered wires, with several screwdrivers alongside on a wood surface.

Nintendo — GameCube

Nintendo GameCube DOL-101 PAL: PicoBoot + WiiKey

Open GameCube optical drive on a wooden floor showing the exposed blue disc and orange housing, with a hand pressing the lid switches that tell the console the lid is closed, testing the drive after recapping its PCB. A Sony BVM-D9H5J monitor behind shows The Legend of Zelda: The Wind Waker.

Nintendo — GameCube

Nintendo GameCube Spice Orange: PicoBoot to FlippyDrive