hitmanmcchitmanmcc
InicioConsolasCRTsSíntomasTécnicasLab

© 2026 Hitman's Museumv1.18.1

Acerca·Privacidad·Términos
Consolas/Nintendo/Super Nintendo Entertainment System (SNES)

Nintendo — Super Nintendo Entertainment System (SNES)

Nintendo PAL 1-Chip SNES: RGB Bypass + Region Switch

25 de agosto de 20213 hilos~1 min de lecturaReparación exitosa
Region / 50–60Hz modAV output mod

Two mods on a Nintendo 1-chip PAL SNES (SNSP-001A): a self-assembled RGB bypass board by Borti4938 and the SuperCIC + UIGR + D4 patch switchless region mod kit from Consoles Unleashed.

Piezas y Herramientas (2)

RGB bypass board

SNES RGB Bypass by Borti4938 for 1-chip SNES, classical big model and SNES2 mini/Jr. Board assembled by me.

Switchless region mod kit (SuperCIC + UIGR + D4 patch)

Consoles Unleashed kit for switchless 50/60Hz region switching on the 1-chip SNES.

hitmanmcc
hitmanmcc

25 de agosto de 2021· Hilo 1

Ver en X ↗

@borti4938 Thank you for sharing the design, BOM and installation instructions. This is a really easy mod and it's well worth it.

hitmanmcc
hitmanmcc

26 de agosto de 2021· Hilo 2

Ver en X ↗

@ConsoleMods Hello, do you mind sharing the resistor values you use for the LED that comes in your kit?

hitmanmcc
hitmanmcc

27 de agosto de 2021· Hilo 3

Ver en X ↗

SNES 1-Chip 50/60Hz SCIC. @SLRMODSHOP thanks for the installation video It's so easy to follow! Thanks @Voultar for the many instructional videos on lifting pins, dental picks do make it way easier. Thanks @ConsoleMods for the kit and help with the LED.

Reparaciones relacionadas

Super Famicom Jr. motherboard on workbench with purple mod board installed, soldering iron, wire strippers, and solder spool visible during repair work.

Nintendo — Super Famicom Jr.

Nintendo Super Famicom Jr. (SHVC-101) Recap & Upgrades

A hand holding the small black composite mod board beside the green Nintendo Famicom motherboard (CPU-GPM-02) on the workbench, with a multimeter and bagged replacement parts sitting nearby.

Nintendo — Famicom

Nintendo Famicom Fuse Fix & Composite Mod

Close-up of the installed N64 RGB mod: the green N64 motherboard seen from its underside, with the RGB amp soldered onto the multi-out port, a wiring harness, and the black connector mounted on the metal shielding.

Nintendo — Nintendo 64

Nintendo 64 NTSC-J: RGB Amp + FT Buddy Long Board

Green NESRGB daughterboard installed on the Sharp Twin Famicom motherboard, the original CPU/PPU DIP chip re-socketed on top, with a white ribbon cable attached to the NESRGB board but not yet connected to anything else.

Nintendo — Sharp Twin Famicom

Sharp Twin Famicom NESRGB Wireless Mod & TwinDiamond

Nintendo Game Boy Light (MGB-101): Battery Leak & Recap

Nintendo — Game Boy Light

Nintendo Game Boy Light (MGB-101): Battery Leak & Recap

Super Famicom motherboard mid-repair: recapped with new capacitors, voltage regulator replaced, some SMD components remaining; soldering iron and loose components visible on workbench.

Nintendo — Super Famicom

Nintendo Super Famicom Recap & Voltage Regulator Swap