hitmanmcchitmanmcc
InicioConsolasCRTsSíntomasTécnicasLab

© 2026 Hitman's Museumv1.18.1

Acerca·Privacidad·Términos

GameCube Jewel Polishing with Meguiar's Compounds

9 de abril de 20221 hilo~1 min de lectura
Polishing

Three GameCube jewels taken out of their consoles and run through cutting, polishing and finishing pads with the matching Meguiar's compounds, the same materials used on car paint. Not perfect, but a substantial improvement on the swirls and scratches.

Piezas y Herramientas (3)

Meguiar's compounds

Car paint products, used here in three stages: Ultimate Compound (G17216) for the cutting pass, Ultimate Polish (G19216) for the polishing pass, and Ultimate Liquid Wax (G210516) to finish.

Pads

Three grades, 76.2mm across and 31.75mm thick, all of which run on a drill as well as on a polisher: the red compounding pad (M3CFP3), the yellow polishing pad (M3PFP3) and the grey finishing pad (M3FFP3).

Polishing tool

Meguiar's Dual Action System (G3500), a dual action head that chucks into an ordinary drill.

hitmanmcc
hitmanmcc

25 de agosto de 2026· Hilo 1· 2 tweets

Ver en X ↗Ver en Bluesky ↗

Many moons ago, when I was still (only) a 3 GameCube man, I found out you could polish the GameCube jewels. So I took them out of the consoles and got to work on them, with some car polishing materials and pads I had, from Meguiar's. These are the before shots.

2 / 2

These are the after shots. I ran them through the cutting, polishing and finishing pads, with the accompanying materials. While not perfect, the improvement was quite substantial I'd say.

Reparaciones relacionadas

Xbox 360 E console on wooden floor, showing restored black plastic shell with polished finish and reflective surface after cleaning and protective treatment.

Microsoft — Xbox 360 E

Microsoft Xbox 360 E: Recap, Reflow, HDD & Clean