hitmanmcchitmanmcc
FeedKonsolenCRTsSymptomeTechnikenLab

© 2026 Hitman's Museumv1.18.1

Über·Datenschutz·Nutzungsbedingungen
Konsolen/Nintendo/Game Boy Light

Nintendo — Game Boy Light

Nintendo Game Boy Light (MGB-101): Battery Leak & Recap

2. November 20261 Thread~1 Min. LesezeitErfolgreich repariert
Rust/corrosionBattery leakage damage
RecapDeep clean

A Game Boy Light that still worked, but carried the scars of batteries left to leak inside it for years. Cleaned up and recapped with a Console5 kit that had been waiting on the shelf for exactly this day.

Teile & Werkzeug (2)

Console5 Game Boy Light cap kit

Nintendo Game Boy Light SMD cap kit from Console5, bought years before it was needed and used for the full recap.

Evapo-Rust

Evapo-Rust, the rust remover the battery contacts, the other corroded metal parts and the screws were soaked in.

hitmanmcc
hitmanmcc

2. November 2026· Thread 1· 5 Tweets

Auf Bluesky ansehen ↗

Many, many moons ago. I bought a Game Boy Light recap kit from Console5, imagining that some day, I might need it. Well, that day has come. 🙂

2 / 5

Today we're servicing this boy that is clearly, in need of attention. It still works but batteries have definitely been left to leak in here and we don't want any of that. It's on the PCB contacts for Start and Select, on the battery contacts, on the inside of the shell...

3 / 5

Giving it the usual white vinegar and isopropyl treatment and also, running the affected metal bits through some Evaporust. Making the shell nice and clean again as well. Look at those shiny battery contacts. 😄

4 / 5

Obviously, we don't forget to treat the screws here.

5 / 5

All recapped, marked, cleaned, reassembled and test playing Kid Dracula. 🧛‍♂️

Verwandte Reparaturen

Black Game Boy Pocket motherboard in its shell, still fully populated: the CPU MGB chip, RAM, electrolytic capacitors, the two brightness and volume trimmer wheels, the cartridge connector and speaker. It rests on the Console5 box the cap kit shipped in (customs label showing), with the Console5 Game Boy Pocket SMD cap kit bag beside it.

Nintendo — Game Boy Pocket

Nintendo Game Boy Pocket (MGB-001) Full Restoration

Nintendo Game Boy Color Japanese: Recap, Reshell & IPS

Nintendo — Game Boy Color

Nintendo Game Boy Color Japanese: Recap, Reshell & IPS

Super Famicom motherboard mid-repair: recapped with new capacitors, voltage regulator replaced, some SMD components remaining; soldering iron and loose components visible on workbench.

Nintendo — Super Famicom

Nintendo Super Famicom Recap & Voltage Regulator Swap

Super Famicom Jr. motherboard on workbench with purple mod board installed, soldering iron, wire strippers, and solder spool visible during repair work.

Nintendo — Super Famicom Jr.

Nintendo Super Famicom Jr. (SHVC-101) Recap & Upgrades

AV Famicom motherboard on a paper-towel work surface, with the old desoldered electrolytic capacitors, a removed 7805 voltage regulator, a spool of Kester Sn63Pb37 solder, used cotton swabs, and a black brass-sponge tip cleaner laid out around it.

Nintendo — AV Famicom

Nintendo AV Famicom (HVC-101) Recap, 7805 & Clean

Two Nintendo Game Boy Player (DOL-017) units seen from their top side (the side that docks to the GameCube) on paper towel, a silver one and an indigo one, each with a sealed Console5 GameCube GB Player cap kit bag (NIN-GC-GBPLAYER-SMD-CK) resting on it, and an FNIRSI soldering iron in its case to the right.

Nintendo — Game Boy Player

Nintendo Game Boy Player (DOL-017) Recap: Leaking Caps