hitmanmcchitmanmcc
FeedKonsolenCRTsSymptomeTechnikenLab

© 2026 Hitman's Museumv1.18.1

Über·Datenschutz·Nutzungsbedingungen
Konsolen/Nintendo/GameCube

Nintendo — GameCube

Nintendo GameCube DOL-101 PAL: PicoBoot + WiiKey

1. Juli 20223 Threads~1 Min. LesezeitErfolgreich repariert
Disc read error
RecapModchip / ODE

PAL Nintendo GameCube DOL-101 in black, with a PicoBoot install using a WiiKey as the storage interface. The mainboard turned out to have almost entirely polymer caps, making the recap a very quick affair.

Teile & Werkzeug (3)

PicoBoot IPL replacement

PicoBoot by webhdx, a Raspberry Pi Pico-based IPL replacement for the Nintendo GameCube that enables homebrew booting on every power-on.

Raspberry Pi Pico

Raspberry Pi Pico, the RP2040 microcontroller board that PicoBoot runs on.

PicoBoot mounting bracket (3D-printed)

Mounting Bracket for Gamecube Picoboot by Retro Reviver Mods, the 3D-printed holder that mounts the PicoBoot inside the console.

hitmanmcc
hitmanmcc

1. Juli 2022· Thread 1

Auf X ansehen ↗

DOL-101 PicoBoot installation using WiiKey as storage media interface. Yet another cube with a dead laser brought to life. Thanks @webhdx installation pics were very useful. #RETROGAMING #GameCube #Nintendo #consolemodding

hitmanmcc
hitmanmcc

19. November 2023· Thread 2· 3 Tweets

Auf X ansehen ↗

(1/5) Gamecube maintenance day. Replacing the caps on the optical drive PCBs. Started 4/5 drives dead, now 5/5 work. Huge success! Thanks @leonkiriliuk, I think it was in one of his posts that I read that the laser isn't usually the issue, it's the caps. #RETROGAMING #restoration

2 / 3

(3/5) This one needed caps and I bridged one of the lid switches because the lever was broken. Working well now. #RETROGAMING #CRT

3 / 3

(5/5) One big happy family. All of them now have working drives! #RETROGAMING #Nintendo #gamecube #restoration #repair

hitmanmcc
hitmanmcc

28. März 2025· Thread 3

Auf X ansehen ↗Auf Bluesky ansehen ↗

Almost at the last one. I took to tackling what would be the hardest one. 🤡🤣 I opened up the PAL DOL-101. Turns out, it's mostly polymer capacitors, so I ended up only replacing one capacitor. #RETROGAMING #Nintendo #GameCube #SonicDX

Verwandte Reparaturen

Open GameCube optical drive on a wooden floor showing the exposed blue disc and orange housing, with a hand pressing the lid switches that tell the console the lid is closed, testing the drive after recapping its PCB. A Sony BVM-D9H5J monitor behind shows The Legend of Zelda: The Wind Waker.

Nintendo — GameCube

Nintendo GameCube Spice Orange: PicoBoot to FlippyDrive

Nintendo GameCube motherboard with Xeno chip installed, showing soldered connections and internal circuitry during refurbishment.

Nintendo — GameCube

Nintendo GameCube Recap & XenoGC Mod for Two Friends

Two GameCube optical drive PCBs being recapped, with desoldered electrolytic capacitors, tweezers, and a resistor laid out on absorbent mat.

Nintendo — GameCube

Nintendo GameCube Optical Drive Recap: 2 Spares

Disassembled Panasonic Q optical drive rails laid out for comparison; one 3D printed replacement rail next to original shattered rail pieces.

Nintendo — Panasonic Q (SL-GC10)

Panasonic Q (SL-GC10) GameCube: Drive Rails & FlippyDrive

Nintendo Game Boy Light (MGB-101): Battery Leak & Recap

Nintendo — Game Boy Light

Nintendo Game Boy Light (MGB-101): Battery Leak & Recap

Sony PS1 PU-8: Green Speckles, Reflow, Recap & xStation

Sony — PlayStation

Sony PS1 PU-8: Green Speckles, Reflow, Recap & xStation