hitmanmcchitmanmcc
FeedConsolasCRTsSintomasTécnicasLab

© 2026 Hitman's Museumv1.18.1

Sobre·Privacidade·Termos
Consolas/Sega/Wondermega

Sega — Wondermega

Victor RG-M1 Wondermega Full Board Recap & Laser Clean

22 de janeiro de 20261 thread~1 min de leitura
Broken/worn drive beltDisc tray won't open
RecapOptical-drive serviceDrive-belt replacement

Full board recap on this Victor RG-M1 Wondermega (JVC's branding of the Sega Wondermega), complete with a laser sled clean. Drew blood for this one; photo evidence in the thread. Everything works; the motorised tray is just waiting on a replacement belt.

hitmanmcc
hitmanmcc

22 de janeiro de 2026· Thread 1· 3 tweets

Ver no X ↗Ver no Bluesky ↗

On the table today we have a Victor RG-M1 Wondermega. We start the refurbishment by recapping the AV board, the mega drive side and the CD-ROM board. Some leakage was visible in the usual spot near the regulators. Let's move on to the next boards. #Sega #RETROGAMING

2 / 3

Next we have the audio/karaoke effects board and the laser board. Nothing obviously wrong here. Also cleaned and lubricated the laser sled and, cut my finger. If you thought Wondermega ownership was pain free, think again. 😄 Let's fire her up!

3 / 3

Everything works, we have those lovely LEDs looking back at us. The motorised tray needs a little help opening but that's just because I don't have a spare belt right now. Road avengers to test the Mega-CD side and Earthion and Dynamite Headdy on Mega Drive duties.

Reparações relacionadas

LG C1 OLED TV displaying Contra Hard Corps (Mega Drive), tested on the restored Sega Wondermega HWM-5010, on a media unit with other consoles and AV cabling below.

Sega — Wondermega

Sega Wondermega HWM-5010 (2nd Unit): Restore & RGB Mod

Corroded Wondermega mainboard showing oxidation on capacitors, damaged traces, and component deterioration requiring restoration work.

Sega — Wondermega

Sega Wondermega HWM-5010 Restoration (1st Unit)

Victor RG-M1 Wondermega: Dead Laser, RGB Mod & Recap

Sega — Wondermega

Victor RG-M1 Wondermega: Dead Laser, RGB Mod & Recap

Disassembled OG Xbox showing heavily corroded metal chassis and optical drive assembly with visible rust, capacitors, and ribbon cables during refurbishment.

Microsoft — Xbox

Microsoft Original Xbox Rust Removal, Recap & Rocky5 Softmod

Fujitsu FM Towns Marty floppy drive PCB during recap; visible IC chip, solder joints, and motor assembly with spindle exposed.

Fujitsu — FM Towns Marty

Fujitsu FM Towns Marty Full Recap (Floppy Pending)

Famicom Disk System drive control board (silkscreen HEAD POSITION, WRITE PROTECT and MOTOR STOP) mid-recap on a blue mat, with several removed old electrolytic capacitors beside it; a soldering iron rests at the bottom left and a Kester solder spool at the bottom right, with flush cutters, tweezers and cotton swabs around it. The drive mechanism sits at the top edge, its newly fitted belt looped round the plastic flywheel.

Nintendo — Famicom Disk System

Nintendo Famicom Disk System: Belt, Head & Recap