hitmanmcchitmanmcc
FeedConsolasCRTsSintomasTécnicasLab

© 2026 Hitman's Museumv1.18.1

Sobre·Privacidade·Termos
Consolas/Nintendo/Panasonic Q (SL-GC10)

Nintendo — Panasonic Q (SL-GC10)

Panasonic Q (SL-GC10) GameCube: Drive Rails & FlippyDrive

25 de junho de 20227 threads~2 min de leituraEm andamento
Broken drive rail/gear
Modchip / ODEFlex / ribbon repair3D-printed part

The optical drive rails on this Panasonic Q (SL-GC10) GameCube/DVD hybrid were in pieces, so 3D-printed replacements were the first order of business. A FlippyDrive followed. Just be aware the flex cable orientation is the opposite of a regular GameCube.

Peças & Ferramentas (1)

FlippyDrive optical drive emulator

FlippyDrive by Team Off Broadway, an SD-card-based optical drive emulator for the Nintendo GameCube, also works in the Panasonic Q (SL-GC10), with the flex cable orientation reversed.

hitmanmcc
hitmanmcc

25 de junho de 2022· Thread 1

Ver no X ↗

Panasonic Q partial drive restoration. Left rail shattered, drive belt deformed. Glued rail for now, replaced belt, turns out it works fine and reads games. Tray actually moves smoothly but I will still revisit this and replace with 3D printed rails. #RETROGAMING #Nintendo

hitmanmcc
hitmanmcc

16 de julho de 2022· Thread 2

Ver no X ↗

Properly restored my Panasonic Q's drive by substituting them with these drive rails on @thingiverse As you can be seen in the pics one of the rails was pretty much shattered to bits. Thanks @nunofgs for the prints. #RETROGAMING #Nintendo #consolemodding

hitmanmcc
hitmanmcc

6 de agosto de 2022· Thread 3

Ver no X ↗

Some valuable knowledge here, for those wishing to restore a Panasonic Q's optical drive using 3D printed parts. #RETROGAMING #Nintendo #consolemodding

hitmanmcc
hitmanmcc

4 de julho de 2025· Thread 4

Ver no X ↗Ver no Bluesky ↗

Finally, after a very long wait, my flippydrive units have arrived! One for my spice orange GameCube and one for my Panasonic Q. #RETROGAMING #Nintendo #GameCube #flippydrive

hitmanmcc
hitmanmcc

10 de setembro de 2025· Thread 5· 2 tweets

Ver no X ↗Ver no Bluesky ↗

1/2 While testing #FlipperMCE I decided I would install the #FlippyDrive on my Panasonic Q too, to test more games. In the process I discovered there's no documentation for the Q and you could assume the flex should be placed the same way as in a normal cube but that's incorrect.

2 / 2

2/2 The orientation is flipped around, which I guess ends up making sense since that way you can fit the screw back on for that connector daughter board for the drive. Here are some pics of the menu and me playing some Double Dash. #Nintendo #GameCube #RETROGAMING #MarioKart

hitmanmcc
hitmanmcc

11 de setembro de 2025· Thread 6

Ver no X ↗Ver no Bluesky ↗

While this works, I was told that the actual intended placement is beneath the shielding. So, this is what you should end up with. #FlippyDrive #Nintendo #GameCube #RETROGAMING

hitmanmcc
hitmanmcc

11 de setembro de 2025· Thread 7

Ver no X ↗Ver no Bluesky ↗

While I was in there, redoing the Flippydrive installation and trying to take pictures that night be used to document the installation procedure. I figured I might as well recap the motherboard, to save me some work in the future, when I decide to recap the rest of the unit.

Reparações relacionadas

Two green circuit boards with ribbon connectors and a black mounting jig displayed on dotted fabric, showing Virtual Boy 4.0 LED array PCB assembly components.

Nintendo — Virtual Boy

Nintendo Virtual Boy: Virtual Ribbon 4.0 Display Fix

Nintendo Handheld Screen Repairs: 2DS, New 3DS XL & New 2DS XL

Nintendo — New 3DS XL

Nintendo Handheld Screen Repairs: 2DS, New 3DS XL & New 2DS XL

Macro of the Panasonic FZ-1 mainboard's power-supply section, the area worst hit by capacitor leakage: an L4960 regulator, the silver inductor L31 (marked 101), surrounding SMD diodes and resistors, a red status LED and the Panasonic "MDFUP064" silkscreen, with the through-holes darkened and corroded from electrolyte damage.

3DO Company — Panasonic FZ-1

Panasonic FZ-1 3DO: Recap & ODE (2nd, Laser Donor)

Panasonic FZ-1 motherboard with multimeter probes, solder wick, and desoldering tools during PSU trace repair and recapping restoration work.

3DO Company — Panasonic FZ-1

Panasonic FZ-1 3DO: PSU, Laser Swap & ODE (1st)

A whole black GameCube connected and powered for testing during the optical-drive recap, its amber power LED lit and its parts out of the shell: the green optical drive with the SD Media Launcher boot disc on its spindle, the controller-port PCB hanging by its flex cable, the cooling fan hanging by the wires of its power-input connector, and the PicoBoot in its 3D-printed holder suspended by its soldered wires, with several screwdrivers alongside on a wood surface.

Nintendo — GameCube

Nintendo GameCube DOL-101 PAL: PicoBoot + WiiKey

Open GameCube optical drive on a wooden floor showing the exposed blue disc and orange housing, with a hand pressing the lid switches that tell the console the lid is closed, testing the drive after recapping its PCB. A Sony BVM-D9H5J monitor behind shows The Legend of Zelda: The Wind Waker.

Nintendo — GameCube

Nintendo GameCube Spice Orange: PicoBoot to FlippyDrive