hitmanmcchitmanmcc
FeedConsolasCRTsSintomasTécnicasLab

© 2026 Hitman's Museumv1.18.1

Sobre·Privacidade·Termos
Consoles/Nintendo/Super Famicom

Nintendo

Super Famicom

2 registos

Super Famicom motherboard mid-repair: recapped with new capacitors, voltage regulator replaced, some SMD components remaining; soldering iron and loose components visible on workbench.
+5 fotos

Nintendo — Super Famicom

Nintendo Super Famicom Recap & Voltage Regulator Swap

Yellowed Nintendo Super Famicom (SHVC-001) given an electrical refresh rather than a cosmetic one. Replaced the voltage regulator and recapped the board (a few SMD values were missing on the day, so some caps are left as a future task), and touched up the solder on the controller ports and power jack. Smoke tested clean with Yoshi's Island. The shell was left yellowed, no retrobrite.

Yellowed shell
4 de nov. de 20251 thread
Repaired Nintendo Super Famicom sitting on top of a Nintendo Satellaview base, running The Legend of Zelda: A Link to the Past on a Sony PVM-14L2; a Sega Mega Drive with a Mega Everdrive Pro cartridge, other consoles, controllers and cables around it on a wood surface.
+5 fotos✓Reparação bem-sucedida

Nintendo — Super Famicom

Nintendo Super Famicom D1 Diode Replacement

This Nintendo Super Famicom (SHVC-001) would not power on due to a failed D1 diode. Tracing and replacing it, plus a recap, had the console booting again.

No power
17 de out. de 20222 threads