hitmanmcchitmanmcc
フィードゲーム機CRT症状テクニックLab

© 2026 Hitman's Museumv1.18.1

プロフィール·プライバシー·利用規約

WavePhoenix WaveBird receiver build

2025年5月2日6スレッド約4分で読めます

I had plenty of WaveBird controllers but only one OEM receiver, so I built a batch of loopj's open-source WavePhoenix receivers, a drop-in replacement for the GameCube WaveBird's RF dongle. Beyond the build, the threads include a full walkthrough of updating the firmware over the WavePhoenix web updater.

部品・工具 (3)

WavePhoenix (open-source WaveBird receiver)

WavePhoenix by loopj, the open-source hardware and firmware these GameCube WaveBird receivers were built from.

Radio modules

RF-STAR RF-BM-BG22C3 modules (Silicon Labs EFR32BG22), the radio reflowed onto each receiver board to handle the wireless link.

Raspberry Pi Pico (flashing probe)

Raspberry Pi Pico, running CMSIS-DAP firmware and used as the SWD debug probe to flash each receiver's EFR32 radio.

hitmanmcc
hitmanmcc

2025年5月2日· スレッド1

Xで見る ↗Blueskyで見る ↗

Got myself something from JLCPBC. These are meant to become @loopj's WavePhoenix receivers once I get the rest of the parts. Just going to try my hand at a few, then I'll see if I'll complete all of the boards. Normally I don't order pre-assembled but I tried it out his time.

hitmanmcc
hitmanmcc

2025年5月5日· スレッド2

Xで見る ↗Blueskyで見る ↗

More pieces of the puzzle!

hitmanmcc
hitmanmcc

2025年5月26日· スレッド3· 5件のツイート

Xで見る ↗Blueskyで見る ↗

1/5 I finally decided to stop procrastinating and get on with assembling some @loopj WavePhoenix receivers. This thread will show you my journey. I started by tinning the pads on 6 PCBs and the 6 EFR32 MCUs I had. 🧵👇 #RETROGAMING #Nintendo #GameCube #WaveBird #WavePhoenix

2 / 5

2/5 Next I flowed the MCUs onto the PCBs using my hot air rework station, heating from below the PCB and inspected the soldering. It's always neat to see the ICs get sucked down onto the pads.

3 / 5

3/5 Then I flashed the debug probe firmware on a Pi Pico, wired a JST connector onto the relevant GPIO pins and proceeded with flashing one of the units.

4 / 5

4/5 Next step was to wire up another JST connector, onto a GameCube controller plug. I don't have a crimping tool so I did some very cautious and patient soldering for testing purposes. Lo and behold, the damn thing actually works. Thank you very much @loopj! Top notch man. 👌

5 / 5

5/5 Bonus video and pic, showing a receiver working and all of the other units post testing. All of them are working. Just need to finish building out connectors and printing shells. I played some Mario Kart Double Dash and the receiver works beautifully.

hitmanmcc
hitmanmcc

2025年6月2日· スレッド4· 3件のツイート

Xで見る ↗Blueskyで見る ↗

1/3 Some more radios arrived today. So I broke out the rest of the PCBs I had ordered and got to work building more WavePhoenix receivers. Here we can see the tinning of the pads on the PCBs and the hot air soldering work. #WavePhoenix #Nintendo #GameCube

2 / 3

2/3 Afterwards it was onto flashing the radios with the latest bootloader and firmware. Followed by validation that they all paired with a controller.

3 / 3

3/3 The next stage was to run all PCBs through the ultrasonic cleaner, rinse and give them all some pay time in Super Mario Strikers to ensure all of them worked properly. Cheers @loopj for making this possible!

hitmanmcc
hitmanmcc

2025年6月3日· スレッド5· 6件のツイート

Xで見る ↗Blueskyで見る ↗

For those of you wondering how to update the firmware on your @loopj WavePhoenix receivers. Here's a short tutorial using Chrome and the web application on an Android phone, via Bluetooth. 🧵👇 1 - Access

2 / 6

2 - Press the button on the receiver until the LED stops flashing 3 - Tap the connect device button to open the pairing menu where you will now see your WavePhoenix receiver and tap Pair

3 / 6

4 - Your phone and receiver will now be paired and you will see the current firmware version on your receiver 5 - Download the latest firmware version, for the radio in your receiver, in .gbl file format (see file extension). Firmware available here:

4 / 6

6 - Tap Choose firmware file and select the file you previously downloaded you should then see an option to flash the firmware 7 - Tap Flash firmware

5 / 6

8 - Wait for the firmware to finish flashing, enjoy the progress bar moving (it's fairly quick)

6 / 6

9 - Once done you will see the following prompt, tap Reboot device and you are all done Congratulations, you've flashed your receiver! Now go have some fun! GameCube is life!

hitmanmcc
hitmanmcc

2025年7月29日· スレッド6

Xで見る ↗Blueskyで見る ↗

Courtesy of @nunofgs I finally finished my WavePhoenix units for personal use. He printed the shells for me and I crimped a few more plugs. @loopj I like the snap-fit design but I feel the tolerances on the lid could be improved. #Nintendo #GameCube #RETROGAMING